Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

CSEDO24-Amber

SimpleSeal

CSEDO24-Amber Main Image
CSEDO24-Amber Main Image
Model #: CSEDO24-Amber
Features:
  • Narrow-spectrum 570nm amber LED circuit provides only high-purity light without UV for spectrally-sensitive applications
  • Available high-output, high-CRI white LED circuit provides visual acuity and accurate color rendition
  • Diffused high-efficiency lens for reduced glare
  • One-piece overlapping door provides air-tight integrity of luminaire
  • Suitable for universal installation into 1.0" and 1.5" grid or flange (drywall) ceilings
Application(s):Pharmaceutical
Biosafety and Containment
Schools and Universities
Cleanrooms
Containment Areas
Laboratories
Research and Development
Manufacturing
Lamp Type(s):LED
Size(s):24"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe 20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (8) for 2×2, (12) for 2×4.
Doorframe GasketOne-piece closed cell extruded Nitrile gasket seals doorframe to housing and ceiling structure.
ElectricalReplaceable 570nm amber (115 nm FWHM bandwidth) mid-power LED arrays produce no Ultraviolet and less than 0.019 watts of light below 480nm. Available separately circuited white mid-power LED arrays in 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 82 CRI. 120/277VAC or 347VAC, 50/60Hz electrical input with replaceable high power factor electronic, constant-current driver (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities on white and amber circuits (non dim-to-dark with 347V; 330μA maximum source current per circuit). Optional 0-10V dimming with 0.1-100% range and dim-to-dark capabilities via eldoLED SOLOdrive series driver (n/a 347V input; ≤0.5V required from dimming control for dim-to-dark operation; 400μA max. source current). White circuit and amber circuit can be independently
powered and dimmed.
HousingStandard 24-gauge (optional 20-gauge) cold rolled steel, hole-free, one-piece, seam-welded construction. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationNon-IC recessed ceiling mounting into grid and flange application types. Flange installation utilizes included adjustable swing-out mounting brackets. Grid installation suitable for 1" and 1.5" T-bar ceilings. Housing is field-convertible between grid and flange-style mounting types. See Options for continuous row mounting and install frames.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. Certified IP66 per IEC 60598. CCEA Approved. Optional NSF Protocol P442 certified. FED-STD- 209E/Class 1 (ISO 3) Cleanrooms. Suitable for BSL 1-4 laboratories.
OpticsSymmetric optic includes diffused, impact-resistant 0.118” thick acrylic lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year warranty.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

top