| Doorframe | Heavy duty extruded marine grade aluminum with anodized finish. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (12) for 2×4. |
|---|
| Doorframe Gasket | One-piece closed cell extruded nitrile gasket seals doorframe to ceiling structure. |
|---|
| Electrical | Electronic ballast <10% THD standard. See Ordering Information for alternate or multiple ballasts, sealed wireway and optional equipment. Lamps by others. |
|---|
| Housing | 20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Installation | 1.5" and 2.0" T-Bar installation standard. See Options for T-Bar clips and earthquake clips. Consult factory for custom T-Bar ceilings. |
|---|
| Lens | .125" #12 high impact acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. See Options for alternate lens selections. If required, specify lens overlay combinations inner/outer (Example: R/T). |
|---|
| Listings | UL and CUL Listed for Wet Locations. UL Classified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved. Meets Standard for luminaire FED-STD-209E/Class 100 (ISO 5) Cleanrooms. |
|---|