| Doorframe | 20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and (8) for 2×2, (10) for 1×4, (12) for 2×4 captive flush mounted Phillips head stainless steel fasteners. Doorframe Gasket: One-piece closed cell extruded silicone gasket seals doorframe to housing. |
|---|
| Electrical | Replaceable white mid-power LED array. Available 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 82 CRI, R9>0. 630nm red mid-power LED array (16nm FWHM bandwidth). 120/277VAC or 347VAC, 50/60Hz electrical input with replaceable high power factor electronic, constant-current driver (<10% THD, >0.90 PF). Minimum 85% driver efficiency. EMC meets or exceeds FCC CFR Part 15 requirements. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities on white and red circuit (non dim-todark with 347V; 495 μA maximum source current per circuit). Optional 0-10V dimming with 0.1-100% range and dim-to-dark capabilities via eldoLED SOLOdrive series driver (n/a 347V input; ≤0.5V required from dimming control for dim-to-dark operation; 600μA max. source current). White circuit and red circuit can be independently powered and dimmed. |
|---|
| Housing | 20-gauge CRS. Hole-free, one-piece, seam-welded construction. Integral aluminum heat sink for thermal dissipation. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Installation | Four .312" holes for surface mounting with side wiring access hole. |
|---|
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. Certified IP65 per IEC 60598. CCEA Approved. Meets Standard for FED-STD-209E/Class 1 (ISO 3) Cleanrooms. Suitable for BSL 1-4 laboratories. |
|---|
| Optics | Symmetric optic includes diffused, impact-resistant acrylic lens. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com. |
|---|
| Warranty | Limited five (5) year warranty. |
|---|