Doorframe | 20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (8) for 2×2, (12) for 2×4. Thumb screws used for FN option.
|
---|
Doorframe Gasket | One-piece closed cell extruded Nitrile gasket seals Doorframe to housing and ceiling structure. |
---|
Electrical | Replaceable white mid-power LED array. Available 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 82 CRI, R9>0. 630nm red mid-power LED array (16nm FWHM bandwidth). 120/277VAC or 347VAC, 50/60Hz electrical input with replaceable high power factor electronic, constant-current driver (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range with dim-to-dark capabilities on white and red circuit (non dim-to-dark with 347V; 495 μA maximum source current per circuit). Optional 0-10V dimming with 0.1-100% range and dim-to-dark capabilities via eldoLED SOLOdrive series driver (n/a 347V input; ≤0.5V required from dimming control for dim-to-dark operation; 600μA max. source current). White circuit and red circuit can be independently powered and dimmed. |
---|
Housing | 20-gauge CRS or stainless steel. Hole-free, die formed and welded construction. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
|
---|
Installation | Non-IC recessed ceiling mounting into walkable grid or walkable ceiling systems. Walkable ceiling (flange) installation suitable for ceilings up to 4" in thickness. Secured to ceiling with continuous perimeter compression to ceiling panel. Grid installation suitable for 1" and 1.5" T-bar ceilings. Supplemental support required. Housing is universal in construction between grid and flange-style mounting types.
|
---|
Listings | Luminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. Certified IP6x from above ceiling (Dust Tight). Certified IP65 from below per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved. Suitable for FED-STD-209E/Class 1 (ISO 3), Biosafety Labs Rated BSL 3 and 4. as well as EU GMP Grade A Cleanrooms. Optional NSF2 Food Zone/Non-Contact. |
---|
Optics | Symmetric optic includes diffused, impact-resistant acrylic lens. FN option includes FDA approved Food Zone clear polycarbonate lens outer lens; diffused acrylic inner lens. |
---|
Photometrics | Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
|
---|
Top Access Door | 20-gauge CRS panel is cable hinged to housing for room-side removal. Panel is sealed with a closed cell gasket to housing inner surface. Protected from accidental foot traffic to 600lbs static load without damage when properly installed.
|
---|
Warranty | Limited five (5) year warranty.
|
---|