| Controls | Optional embedded microwave motion sensor mounted behind light guide panel. Remote adjustment for dim level, timeout period and sensor sensitivity settings. Factory default is 30% dimming and 20min. timeout. Sensor operates at 5.8 GHz (continuous-wave radar) and provides 360° coverage at various mounting heights and coverage areas. |
|---|
| Doorframe | Extruded 6063-T5 aluminum construction with clear anodized finish as standard. Optional TGIC polyester powder coat finish in Gloss White. Doorframe serves as integral heat sink to the edge-lit LED light engine. Secured to housing via aircraft cables and flush-mounted Phillips-head fasteners. Closed-cell gasketing secures doorframe to housing and lens to doorframe in IP-rated models. |
|---|
| Electrical | Available 3000K, 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Standard min. 80 CRI, optional min 90 CRI. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.90 PF). Standard 0-10V dimming with 10-100% range without dim-to-dark capabilities; 0.4mA max. source current per luminaire. Optional 0-10V dimming to 1% with dim-to-dark capabilities; 0.2mA max. source current per luminaire. Optional DALI-2 DT6 driver with 1-100% dimming range without dim-to-dark capabilities. |
|---|
| Housing | Precision-formed 24-gauge cold rolled steel. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Installation | Suitable for Type-IC recessed ceiling installation into 9/16" and 15/16" lay-in grid ceilings. Wire access panel on rear of housing allows wire connections without door removal. Wire access panel is gasketed when ordered with IP66 option. See Accessories for adapter kit for drywall ceiling installation. Suitable for -20°C to 40°C ambient environments, unless otherwise noted. |
|---|
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratories for Indoor Wet Locations. Optional IP66 rating. NSF2 Splash/Non-Food Zone. CCEA Approved. Suitable for ISO5-8 cleanroom environments. |
|---|
| Optics | Edge-lit, laser-etched light guide panel in acrylic with high-efficiency backing reflector. Outer diffuser in acrylic. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com |
|---|
| Warranty | Limited five (5) year LED warranty. |
|---|