Skip to Content
Kenall Manufacturing - Homepage
Main Content

FES3

EnviroSeal for Food Processing

FES3 Main Image
FES3 Main ImageEnviroseal Pendant MountEnviroseal RelampEnviroSeal Continuous Row MountEnviroSeal Shock-resistant Socket
Model #: FES3
Features:
  • Surface mount – ceiling or wall; 3"×24", 3"×36", 3"×48", 3"×96"
  • One-piece 20-gauge housing with UV-stabilized polycarbonate lens
  • IP65 option available
  • For Hazardous applications please refer to the HES series
Application(s):Kitchen and Food Prep
Cafeterias
Cold Storage Freezers
Meat Processing Facilities
Industrial Food Processing Facilities
Manufacturing
Food Processing
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):LED
Linear Fluorescent
Size(s):3"W
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalClass P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA
HousingOne-piece, seam-welded 20-gauge CRS. Base provided with two-point mounting holes and one wireway hole. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens is positioned in baseplate channels and retained with stainless steel fastener. Base mounts flush to ceiling or wall surface.
Lens/GasketUV-stabilized, pearlescent or clear polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .125". Linear silicone gasket to seal doorframe to housing.
ListingsLISTINGS: UL and CUL listed for Wet Location – ceiling mount covered ceiling. UL and CUL listed for Damp Location – horizontal wall mount. Optional UL and CUL Listed for Wet Location (WW Option) –horizontal wall mount. Optional UL certified IP65 per IEC 60598 (IP65 Option) – ceiling mount. NSF2 Splash/Non-Food Zone. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
Lumen DataFES3 Lumen Data
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyTwo-point mounting, polycarbonate lens and Torx® with center pin fastener required for Peace of Mind Guarantee®. Two-point mounting, polycarbonate lens and Torx® with center pin fastener required for Peace of Mind Guarantee®. One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

top