| Baseplate | Die-formed marine grade aluminum; welded corners. Provided with four-point mounting holes, one wireway holes. TGIC Polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours. |
|---|
| Electrical | Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA. Consult factory for flourescent options. |
|---|
| Hardware | Four stainless steel Torx® with center pin fasteners. Internal brackets and fasteners are non-corrosive. Surface Conduit Adapter (SCA) accessory – stainless steel trim frame assembly with integral J-box; finished to match lens frame (not available with CA finish). Watertight conduit fittings supplied by others. Caulk Plate (CP) accessory – stainless steel plate (adds .625" height) finished to match lens frame (not available with CA finish). Stainless steel fasteners provided for mounting fixture to CP or SCA. |
|---|
| Installation | Standard four-point mounting required for Peace of Mind Guarantee®. |
|---|
| Lens | UV-stabilized, high impact resistant, pressure formed pearlescent 100% DR acrylic. Nominal thickness .125". Lens secured in place by lens frame and sealed to baseplate with closed cell silicone gasket. |
|---|
| Lens Frame/Cross Bars | Marine grade aluminum; secured to baseplate with tamperresistant stainless steel Torx® with center pin fasteners. Cross bars nominal thickness .25". Post assembly TGIC polyester powder coat - 5-stage pre-treatment; Salt spray test: 1,000 hours. Optional perf insert 30% open, stainless steel. |
|---|
| Listings | UL and CUL listed for Wet Location. UL certified IP65 in compliance with IEC 60598. ADA Compliant. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. |
|---|
| Lumen Data | FS524R Lumen Data |
|---|
| Patent | 7,029,139; D525,386; D526,082; D527,135; and D527,483. |
|---|
| Photometrics | For photometric information, go to www.kenall.com. |
|---|
| Reflector | Die-formed marine grade aluminum. Full reflector/wire cover – 92% reflectivity. |
|---|
| Warranty | One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. |
|---|