Skip to Content
Kenall Manufacturing - Homepage
Main Content

H99DSM

Herculux for Institutional High Abuse

H99DSM Main Image
H99DSM Main Image
Model #: H99DSM
Features:
  • Surface mount – ceiling; 13"W×13"L×6"D
  • One-piece heavy duty die-cast housing
  • UV-stabilized, injection molded polycarbonate lens
  • Stainless steel Torx® fasteners
Application(s):Parks and Recreation
Multifamily Housing
Walkways
Stairwells
Schools and Universities
Exteriors and Entryways
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):9"×9"
Listings:  
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketDie-cut closed cell neoprene gasket seals die-cast housing to ceiling surface. Lens inset into housing and sealed to integral ledge with one “O” ring closed cell silicone gasket.
HardwareFour stainless steel Torx® with center pin fasteners secure lens/visor to housing.
HousingOne-piece heavy duty die-cast, low-copper aluminum housing. Housing flange interlocks around refractor producing maximum moisture deflection and resistance to prying. Housing provided with four standoff mounting holes. One 3/4" IPS tapped hole on back of housing. Two 3/4" IPS tapped and plugged holes on sides of housing – see Cross Section/Details. Standard housing in dark bronze TGIC polyester powder coat – 5-stage pre-treatment.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®.
LensOne-piece wraparound lens (UV-stabilized, high impact, virgin injection molded polycarbonate). Smooth exterior, prismatic interior. Nominal thickness: 0.125".
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
ReflectorHigh reflectance painted aluminum.
VisorOne-piece injection molded opaque dark bronze polycarbonate (UV-stabilized). Optional finishes to match housing. Nominal thickness .125". Visor allows for full-cutoff light output.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

top