HASECI14

SimpleSeal

Model #:	HASECI14
Features:	Surface corner mount – 8"×48" One-piece inset doorframe, secured to housing with continuous piano hinge and Torx® fasteners 20-gauge hole-free, one-piece cold rolled steel housing Closed cell extruded silicone gasket seals doorframe to housing Peace of Mind Guarantee® against breakage UL certified IP65 per IEC 60598
Application(s):	Restrooms Stairwells Sally Ports
Lens Type(s):	.187" Prismatic Polycarbonate Specified Lens .125" #12 Prismatic Acrylic inside lens/.250" Clear Polycarbonate outside lens
Lamp Type(s):	Linear Fluorescent
Size(s):	12"×48"
Listings:

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Doorframe	18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe secured to housing with continuous hinge and 3 tamper-resistant stainless steel Torx® with center pin fasteners.
Doorframe Gasket	Closed cell extruded silicone gasket seals doorframe to housing.
Electrical	Fluorescent electronic ballasts (<10% THD). Lamps by others. See Electrical Options for additional options.
Housing	20-gauge CRS. Hole-free three-piece seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Installation	Four .312" holes for surface mounting.
Lens	See Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®.
Listings	UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.