| Doorframe | 18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens frame secured to housing with continuous hinge and 3 tamper-resistant stainless steel Torx® with center pin fasteners. |
|---|
| Doorframe Gasket | Closed cell extruded silicone gasket seals lens frame to housing. |
|---|
| Electrical | Fluorescent electronic ballasts (<10% THD). Lamps by others. See Electrical Options for additional options. |
|---|
| Housing | 20-gauge CRS. Hole-free seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Housing Flange | 18-gauge CRS. Mitered and welded corners and spot-welded to housing. |
|---|
| Installation | Adjustable swing-out mounting brackets standard. |
|---|
| Lens | See Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®. |
|---|
| Listings | UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved. |
|---|