HASEFI24

SimpleSeal

Model #:	HASEFI24
Features:	Recessed ceiling mount – flange; 2'×4' One-piece inset doorframe, secured to housing with continuous piano hinge and Torx® fasteners 20-gauge hole-free, one-piece cold rolled steel housing Closed cell extruded silicone gasket seals doorframe to housing Peace of Mind Guarantee® against breakage UL certified IP65 per IEC 60598
Application(s):	Cafeterias Restrooms Stairwells Storage Facilities Corridors Sally Ports Exteriors and Entryways Gymnasiums and Multipurpose Rooms
Lens Type(s):	.187" Prismatic Polycarbonate .250" Clear Polycarbonate Specified Lens .125" #12 Prismatic Acrylic inside lens/.250" Clear Polycarbonate outside lens
Lamp Type(s):	Linear Fluorescent
Size(s):	24"×48"
Listings:

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Doorframe	18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens frame secured to housing with continuous hinge and 3 tamper-resistant stainless steel Torx® with center pin fasteners.
Doorframe Gasket	Closed cell extruded silicone gasket seals lens frame to housing.
Electrical	Fluorescent electronic ballasts (<10% THD). Lamps by others. See Electrical Options for additional options.
Housing	20-gauge CRS. Hole-free seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Housing Flange	18-gauge CRS. Mitered and welded corners and spot-welded to housing.
Installation	Adjustable swing-out mounting brackets standard.
Lens	See Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®.
Listings	UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.