Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

HASEGI22

SimpleSeal

HASEGI22 Main Image
HASEGI22 Main Image
Model #: HASEGI22
Features:
  • Recessed ceiling mount – Grid; for 1.0" and 1.5" T-Bars – 2'×2'
  • One-piece inset doorframe, secured to housing with continuous piano hinge and Torx® fasteners
  • 20-gauge hole-free, one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • Peace of Mind Guarantee® against breakage
  • UL certified IP65 per IEC 60598
Application(s):Cafeterias
Restrooms
Stairwells
Storage Facilities
Corridors
Sally Ports
Exteriors and Entryways
Gymnasiums and Multipurpose Rooms
Lens Type(s):.125" Prismatic Acrylic
.187" Prismatic Polycarbonate
.250" Clear Polycarbonate
Specified Lens
Lamp Type(s):Linear Fluorescent
Size(s):24"×24"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe secured to housing with continuous hinge and (2) for 2×2 tamper-resistant stainless steel Torx® with center pin fasteners. Doorframe Gasket closed cell extruded silicone gasket seals doorframe to housing.
ElectricalFluorescent electronic ballasts (<10% THD). Lamps by others. See Electrical Options for additional options.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.Housing Flange 20-gauge CRS. Mitered and welded corners and spot-welded to housing.
Installation1.0" and 1.5" T-Bar installation standard. See Options for T-Bar clips. Consult factory for custom T-Bar ceilings.
LensSee Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

top