| Electrical | Class P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. |
|---|
| Finish | Brushed stainless steel finish (#4B) or white TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Hardware | One Type 302 stainless steel Phillips head fastener secures lens in housing channel. |
|---|
| Housing | One-piece, seam-welded 20-gauge CRS. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface. |
|---|
| Lens/Gasket | UV-stabilized polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .125". IP65 option provided with linear silicone gasket to seal doorframe to housing. |
|---|
| Listings | UL and CUL listed for Wet Location – covered ceiling. UL and CUL listed for Damp Location – horizontal wall mount. Optional UL and CUL Listed for Wet Location (WW Option) – horizontal wall mount. Optional UL certified IP65 per IEC 60598 (IP65 Option) – ceiling mount. Standard Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D. |
|---|
| Sockets | Shock-resistant sockets with gasketed internal locking collar to ensure positive lamp retention. |
|---|
| Warranty | Four-point mounting, polycarbonate lens and Torx® with center pin fastener required for Peace of Mind Guarantee®. |
|---|