| Doorframe | Standard 20-gauge cold rolled steel. One-piece inset style construction with welded corners. Steel and Aluminum selections are finished with gloss white TGIC polyester powder coat finish with 5-stage pre-treatment. Optional 20-gauge type 304 stainless steel (#4 finish-post fabrication). Antimicrobial finish standard on all exposed painted surfaces. Doorframe secured to housing with stainless steel aircraft cables and captive flush-mounted Phillips head stainless steel fasteners - (6) for 1x2, (8) for 1×4 and 2×2, (10) for 2×4. One-piece, closed-cell silicone gasket seals doorframe to housing. |
|---|
| Electrical |
Serviceable mid-power white LED array. Available 3000K, 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 80 CRI standard with optional minimum 90 CRI (R9 > 50) available. 530 nm green mid-power LED array. 120/277VAC or 347VAC, 50/60Hz electrical input with replaceable high power factor electronic, constant-current driver (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range. and dim-to-dark capabilities on white and green circuit. Maximum dimming source current per luminaire 0.4mA (white) / 0.2mA (green). EMC meets or exceeds FCC CFR Part 15 and MIL STD 461F requirements. White and green circuit should be independently powered and dimmed.
|
|---|
| Housing | Standard 24-gauge cold rolled steel with dust-tight, sealed construction. Alternate material options available. Rigid housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours. Antimicrobial finish on all exposed painted surfaces of installed luminaire. Internal surfaces use a proprietary high reflectance coating (Reflectance: >92%). Flange finish matches housing, regardless of doorframe finish. |
|---|
| Installation |
Non-IC recessed ceiling mounting into grid and flange application types. Flange installation utilizes included adjustable swing-out mounting brackets. Grid installation suitable for 1" and 1.5" T-bar ceilings. Universal installation into grid or flange (drywall) ceiling applications. See below for install frames, optionally used for flange mount in hard ceilings (not required).
|
|---|
| Listings |
Luminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. ETL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. Meets FED-STD-209E/Class 1 (ISO 3) Cleanrooms. Compliant with MIL-STD 461G for radiated and conducted emissions (including when ordered with LEL option). CCEA Approved.
|
|---|
| Lumen Data | M4SEDI24-Green Lumen Data |
|---|
| Optics | Injection-molded, high refraction polycarbonate optics provided for each LED. Proprietary KORE Technology™ (Kenall Optical Radiance Engine) delivers improved visual performance and uniform diffuser luminance (<1.5:1 max/min ratio across full lens area). Impact-resistant diffused acrylic outer lens. Symmetric/asymmetric (ASYM) and full-asymmetric (FASYM) optics provide asymmetric throw while retaining uniform luminance. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com. |
|---|
| Warranty | Limited five (5) year LED warranty. |
|---|