Skip to Content
Kenall Manufacturing - Homepage
Main Content

MAUCSL

Stratalume Connects Undercabinet Lighting

MAUCSL Main Image
MAUCSL Main ImageUndercabinet Motion SensorMRIAUC Mounting FeetStratalume Connecting Pieces
Model #: MAUCSL
Features:
  • Available in 9 lengths and T5 lamping to fit any application
  • External mounting feet allow for easy installation
  • Built in plugs snap together for continuous runs
Application(s):Nursing Stations
Patient Rooms
Surgical Suites
Task Lighting
Lamp Type(s):Linear Fluorescent
Size(s):24"L
36"L
48"L
60"L
12"L
Listings:  
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalElectronic ballast <10% THD. Optional electronic ballast (RS): Rapid Start; <10% THD; Suitable for use with occupancy sensors. Optional dimming ballast (DM7): Programmed Start; <10% THD. All ballasts high power factor; UL listed, Class P; Class A audible noise rating. 3500K lamps pre-installed at factory. Male and female grounded connectors provided at ends of series-mount fixtures. See Options and Accessories for additional electrical capabilities.
Electrical AccessoriesWiring modules available with 15 amp hospital grade outlet or master switch. Construction and installation match fixtures. Cordsets: Custom-molded plugs, SVTcord, snap-together design. Power cordsets connect to left side of fixture series; 120V wall outlet powered, 6 amps max. Interconnect cordsets electrically connect fixtures. Available in white or black finish.
End Caps/CoversUV-stabilized, high-impact resistant, injection-molded white or black opaque polycarbonate. Black end caps/covers provided when silver finish (SL) is ordered. Light leak-preventing interlocking design.
GasketClosed-cell extruded EPDM gasket seals lens to end caps.
HousingExtruded marine-grade aluminum. Nominal thickness: 0.060". Antimicrobial finish standard on housing and ballast cover standard with MAUC series.
InstallationExternal mounting feet allow installation without accessing internal compartments. Four-point mounting required for individual fixtures and initial fixture in seriesmount run. Two-point mounting required for subsequent series-mount fixtures. Direct wire in rear of fixture uses push-in connectors behind quick-access cover (7/8" KO). Direct wire into sides of fixture uses included adapter plate. Maximum current of series-runs 6 amps per circuit.
LensUV-stabilized, high-impact resistant, extruded frost 100% DR acrylic. Smooth exterior, linear prism interior. Snap-in tool-less entry design.
ListingsUL and CUL listed for Damp Location. Cord-equipped models listed as Portable Luminaires. NSF2 Splash/Non-Food Zone for MAUC series only.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyLifetime Guarantee against defects in workmanship and materials for the product life of the original installation.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Additional Resources

top