| Electrical | 120-277VAC, 50/60 Hz Maximum input power 3.8 watts. LED light source available in warm white (ANSI 2700K), neutral white (ANSI 4000K), amber (600nm), or blue (470nm). Lumen output adjustable to 100%, 50%, and 25% at time of maintenance or installation. Factory pre-set at 50% dimming level (1.5 watts). |
|---|
| Housing | Die-cast aluminum. TGIC polyester powder coat finish – 5-stage pre-treatment. Salt spray test: 1,000 hours. Antimicrobial finish on all exposed components of installed luminaire. See Ordering Information for finish options. |
|---|
| Installation | Standard installation requires the back plate to be mounted to a NEMA single-gang junction box (supplied by others). See junction box accessories below for adjustable thru-wall and single-sided applications. See SoftStep Contour Junction Box Accessories Tech Sheet for application details. Recommended mounting height is 14" from floor to center of luminaire. |
|---|
| Lens | UV-stabilized, high-impact resistant injection molded pearlescent polycarbonate. |
|---|
| Listings | UL and CUL Listed for Wet Location. NSF2 Splash/Non-Food Zone. ADA Compliant. Optional UL certified IP64 per IEC 60598. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux. |
|---|
| Lumen Data | MCSL-HO Lumen Data |
|---|
| Mounting Plate | Die formed corrosion resistant steel. |
|---|
| Patent | U.S. Patent D639985. |
|---|
| Reflector | Die cast aluminum reflector with integral heat sink. |
|---|