Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

ME14-ICT

MedMaster Envela Recessed Luminaires

ME14-ICT Main Image
ME14-ICT Main ImageEnvela MaintenanceEnvela Perf Lens
Model #: ME14-ICT
Features:
  • Provides environmental disinfection and effective, efficient lighting performance via visible LED light
  • Dual-Mode Indigo-Clean Technology is independently tested to kill 94% of SARS CoV-2 and Influenza-A***, in addition to MRSA
  • Single-Mode Indigo-Clean Technology is independently tested to kill harmful bacteria, such as Staph*, including MRSA**
  • Cleanable to NSF2 and sealed to IP64 construction standards 
Application(s):Cafeterias
Restrooms
Showers
Nursing Stations
Patient Rooms
Foyers and Lobbies
Corridors
Lens Type(s):Clear DR Acrylic with Internal Perforation
Frost High Impact Acrylic
Lamp Type(s):LED
Size(s):12"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Electrical(Single- and Dual-Mode ICT) Serviceable mid-power white and 405nm Indigo LED array.  Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance.  Minimum 82 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF).  Minimum 85% driver efficiency.  Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities.  330μA maximum source current.  Single-Mode ICT provides a single, white disinfection operational mode.  Dual-Mode ICT provides two operational modes based on room occupancy.  White Disinfection Mode is a white LED array for ambient lighting plus a simultaneous low-power 405nm LED array for low-level, continuous and safe environmental disinfection.  Indigo Disinfection Mode is a higher-level 405nm array for continuous safe environmental disinfection during periods of room vacancy.  The operational mode is determined via internal low-voltage device based upon the input signal provided by an external control device/system.  Luminaire dimming is overridden in this operational state.  Refer to the Kenall Dual-Mode ICT Control Application Guide for further description.
Housing20-gauge CRS. One-piece seam welded construction. Housing flange in 18-gauge CRS, with mitered and welded corners, spot-welded to housing. Mitered and welded corners. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
InstallationGrid Mount: Designed for 1" and Slot-T grid. Includes hardware to secure hanger wire. Flange Mount: Includes Frame Kit.
ListingsUL and CUL Listed for Wet Location. UL certified IP64 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved.
PatentU.S. Patent No. 8,511,850.
Reflector/Lens AssemblyFully gasketed, sealed luminous shield diffuser constructed of impact-resistant frost DR acrylic.  Reflector constructed in one-piece, formed 20-gauge CRS.  Low-gloss white TGIC polyester powder coat with 5-stage pre-treatment.  Salt spray test 1,000 hours.  Tool-less lamp access.
WarrantyLimited five (5) year warranty on LED lamps.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

top