Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

MEIC22

Indigo-Clean

MEIC22 Main Image
MEIC22 Main Image
Model #: MEIC22
Features:
  • Two operational modes: Ambient White Disinfection Mode & Indigo Disinfection Mode
  • Recessed ceiling mount – grid or flange; 2'×2' and 2'×4'
  • Stands up to rigorous cleaning protocols
  • Tool-less access for relamping and maintenance
Application(s):Patient Rooms
Lens Type(s):Frost High Impact Acrylic
Lamp Type(s):LED
Size(s):2'x2'
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ControlsDisinfection switching mode determined via internal low-voltage device based upon input received by provided external IC100 room control system.
ElectricalServiceable composite-bodied mid-power white LED array and high-power 405 nm indigo LED array. Available 3700K and 4300K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 80 CRI standard with optional minimum 90 CRI available. 120/277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range with dim-to-dark capabilities in White Disinfection Mode. 700 μA maximum source current. Two operational modes: White Disinfection Mode is a white LED array for ambient lighting plus simultaneous lowpower 405nm indigo array for low-level continuous environmental disinfection. Indigo Disinfection Mode is a high power 405nm Indigo LED array for continuous environmental disinfection. Operational mode determined via internal low-voltage device based upon input received by provided external IC100 room control system.
Housing20-gauge CRS. One-piece seam-welded construction. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
Housing Flange18-gauge CRS, standard 4-piece construction, spot-welded to housing. Mitered and welded corners.
InstallationGrid Mount: Designed for 1" and Slot-T grid. Includes hardware to secure hanger wire. Flange Mount: Includes Frame Kit.
Lamp ShieldingFully gasketed, sealed luminous shield of impact resistant DR acrylic.
ListingsUL and CUL Listed for Wet Location. UL certified IP64 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved.
PatentIndigo-Clean products and technology covered by U.S. Patent No. US 9,039,966 and US 8,398,264. Product may also be covered by patents found at www.kenall.com/patents. Other patents pending.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please contact Indigo-Clean@Kenall.com.
Reflector/Lens Assembly20-gauge CRS. One-piece seam-welded construction. Tool-free lamp access. White High (92%) Reflectance Low Gloss TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LEDs and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

top