Skip to Content
Kenall Manufacturing - Homepage
Main Content

METESU

Millenium Metrex Exit & Emergency

METESU Main Image
METESU Main Image
Model #: METESU
Features:
  • Surface mount – wall or ceiling; Single Face
  • Indirect LED with life up to 50,000 hours
  • Cooler operation and simpler testing protocol
Application(s):Parks and Recreation
Packaging and Staging
Multifamily Housing
Cafeterias
Restrooms
Stairwells
Signage
Foyers and Lobbies
Corridors
Gymnasiums and Multipurpose Rooms
Natatoriums
Lamp Type(s):LED
Listings:       
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

CanopyHigh impact, injection molded polycarbonate canopy cover with heavy gauge galvanized steel mounting plate with integral 1/4-20 threaded studs. Canopy mounting plate provided with four-point mounting holes, one wireway hole and temporary junction box
mounting holes. Closed cell die-cut Neoprene gasket seals canopy to mounting surface.
Electrical624 nm Red, or 527 nm Green LED light source. Electrical components mounted to removable high impact, injection molded polycarbonate chassis. Drill points provided for optional conduit entry.
HousingHigh impact, injection molded polycarbonate. Housing provided with canopy mounting and wireway drill points top and side – see Cross Section/Details. Closed cell die-cut Neoprene gasket seals housing to canopy.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®.
LegendLegend illuminated by internal high output LEDs. Lettering height and stroke determined by legend option. Polycarbonate red or green filter panels. Stencil is 18-gauge laser cut steel with TGIC polyester powder coat finish to match housing.
ListingsUL and CUL listed for Wet Location. UL certified IP64 per IEC 60598. Meets or exceeds UL924 and NFPA 101 standards. Meets or exceeds CSA and NRCAN requirements. NSF2 Splash/Non-Food Zone.
OptionsSealed nickel-cadmium Emergency Battery Pack (EL) with standard deep cycle battery conditioning, self test and self diagnostic circuitry, remote laser activated test switch, protected mechanical test switch and status indicator. Provides 120 minutes of emergency operation. The Emergency Battery Pack (EL) is suitable for 10°C to 45°C (50°F to 113°F). Cold Weather Emergency Battery Pack (CEL) suitable for -45°C to 45°C (-49°F to 113°F).
ShieldUV-stabilized, high impact, injection molded clear polycarbonate. Nominal thickness .120". Corrosion resistant Phillips head fasteners secure shield to housing. Continuous closed cell silicone gasket seals shield to housing.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Additional Resources

top