Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

MMAC24-ICT

MedMaster for Behavioral Health

MMAC24-ICT Main Image
MMAC24-ICT Main Image
Model #: MMAC24-ICT
Features:
  • Provides environmental disinfection and effective, efficient lighting performance via visible LED light
  • Dual-Mode Indigo-Clean Technology is independently tested to kill 94% of SARS CoV-2 and Influenza-A***, in addition to MRSA
  • Single-Mode Indigo-Clean Technology is independently tested to kill harmful bacteria, such as Staph*, including MRSA**Surface, recessed grid or recessed flange mount – 1'×4', 2'×2', 2'×4'
  • Center diffuser provides direct/indirect ambient lighting
  • Anti-ligature construction
Application(s):Behavioral Health
Lens Type(s):.187" Clear Polycarbonate
.250" Clear Polycarbonate
.375" Clear Polycarbonate
Lamp Type(s):LED
Size(s):24"×48"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

DoorframeOne-piece die-formed prime grade material as specified – see Ordering Information. Doorframe supported to housing with two aircraft cables. Corners continuously seam welded and smooth with no post grinding (TIG).
Electrical
(Single- and Dual-Mode ICT) Serviceable mid-power white and 405nm Indigo LED array. Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance. Minimum 82 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 330μA maximum source current. Single-Mode ICT provides a single, white disinfection operational mode. Dual-Mode ICT provides two operational modes based on room occupancy.  White Disinfection Mode is a white LED array for ambient lighting plus a simultaneous low-power 405nm LED array for low-level, continuous and safe environmental disinfection.  Indigo Disinfection Mode is a higher-level 405nm array for continuous safe environmental disinfection during periods of room vacancy.  The operational mode is determined via internal low-voltage device based upon the input signal provided by an external control device/system.  Luminaire dimming is overridden in this operational state.  Refer to the Kenall Dual-Mode ICT Control Application Guide for further description.
 
FastenersTorx® head with center pin hardened security screws. Fully recessed.
FinishGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Optional antimicrobial finish.
GasketClosed cell Neoprene/EPDM/SBR gasket seals door to housing.
HousingDie-formed prime grade material as specified – see Ordering Information. TIG and spot welded construction.
InstallationSURFACE MOUNT: Four .312" diameter holes. FLANGE MOUNT: Yoke mounting hardware & brackets included. Install Frame positively locates yoke brackets within ceiling opening assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets.
Lamp ShieldingPerforated metal (white TGIC polyester powder coat finish) with pearlescent acrylic diffuser.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location and non-IC recessed installations (Flange mounting). ETL certified IP65 per IEC 60598. NSF2 Splash/ Non-Food Zone. 
OpticsExtruded high-efficiency frosted DR acrylic inner diffuser. Clear impact-resistant polycarbonate outer lens as specified—see Ordering Information.
PatentU.S. Patent No. D562,767 – Low Voltage Controller (LVC) option.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

top