| Electrical | Available in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA. Optional Motion Sensor (MS) has factory default settings of 20 minute time out, 30% dimming. |
|---|
| Gasketing | Die-cut, closed cell neoprene self adhesive gasket seals housing to mounting surface. Closed cell, silicone “O” ring gaskets positioned and friction secured in gasket channels of lens base and housing. |
|---|
| Hardware | One stainless steel Torx® with center pin fastener. |
|---|
| Housing | Marine grade die-cast aluminum. Rib reinforced construction. Integral heat sinks. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Housing provided with four-point mounting holes, one wireway hole and temporary junction box mounting drill points. Standard black or white exterior TGIC polyester powder coat – 5-step pre-treatment. Dark bronze optional finish. |
|---|
| Installation | For wall mount installation, mount lamp base up on all HID lamp sources. |
|---|
| Lens | UV-stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive Torx® with center pin fastener. |
|---|
| Lens Base | Lens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate. |
|---|
| Listings | Luminaire is certified to UL Standards by either Underwriters Laboratory or Intertek Testing Laboratory for wet location (listing includes Emergency Battery Pack “EL” option). UL certified IP64 per IEC 60598. IESNA-designated full cut-off. IDA-Approved™ Dark-Sky Friendly Fixture. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux. |
|---|
| Reflector | Compact Fluorescent: Full reflector/wire cover – 92% reflectivity. HID: Full reflector/wire cover. High efficiency semi-specular aluminum. |
|---|
| Warranty | One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps
and driver for defects resulting in a fixture lumen depreciation of 30% or greater. |
|---|