| Decorative Outer Lens | Acrylic translucent white lens standard. Nominal thickness .125". Optional decorative Lumicor® resins – see Ordering Information. |
|---|
| Electrical | Replaceable high-brightness ANSI 3000K or 4000K LED array. Luminaire input
24V DC from remote-mounted, 120-240V AC, high power factor power supply (MRIPS-312
ordered separately). Dimming capability controlled through compatible 0-10V dimmer (supplied
by others). 10%-100% dimming range. MRI room EMI filter required (supplied by others). |
|---|
| Hardware | One non-ferrous stainless steel Phillips-head fastener standard; four fasteners with IP64 option for MRIMAS813 and MRIMAS826; six fasteners for MRIMAS838 and MRIMAS850. Internal brackets and fasteners are non-ferrous and non-corrosive. |
|---|
| Housing | Non-ferrous marine grade extruded aluminum. Non-ferrous marine grade die-cast aluminum end caps. TGIC polyester powder coat finish – 5-stage pre-treatment; Salt spray test: 1,000 hours. Antimicrobial finish on all exposed components of installed luminaire. |
|---|
| Inner Lens | UV-stabilized, high impact resistant, extruded 100% DR/acrylic frost lens. Nominal thickness .100". Lens secured in place by lens frame. |
|---|
| Installation | Standard four-point mounting required on MRIMAS813 and MRIMAS826. Standard six-point mounting on MRIMAS838 and MRIMAS850. All power and signal wiring must be completely shielded in grounded conduit. |
|---|
| Listings | Luminaire is certified to UL1598 and UL8750 standards by Intertek Testing Services for Damp Location – covered ceiling and wall mount. MRIMAS813 is also UL and CUL listed. NSF2 Splash/Non-Food Zone. ADA compliant. Optional ETL certified IP64 per IEC 60598. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. Kenall certifies product by both Underwriters and Intertek Testing Laboratories. |
|---|
| Patent | U.S. Patent No. 7,029,139; D610,294. |
|---|
| Photometrics | For photometric information, go to www.kenall.com |
|---|
| Reflector | Die-formed non-ferrous marine grade aluminum. Full reflector/wire cover – 92% reflectivity. |
|---|
| Warranty | One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. Warranty is void if all wiring is not completely shielded in grounded conduit. |
|---|