Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

MWUD-ICT

MedMaster

MWUD-ICT_HS01.png
MWUD-ICT_HS01.png
Model #: MWUD-ICT
Features:
  • Wall-mounted, single-function luminaire with up and down lighting
  • Provides environmental disinfection and effective, efficient lighting performance via visible LED light
  • Dual-Mode Indigo-Clean Technology is independently tested to kill 94% of SARS CoV-2 and Influenza-A***, in addition to MRSA
  • Single-Mode Indigo-Clean Technology is independently tested to kill harmful bacteria, such as Staph*, including MRSA**
Application(s):Patient Rooms
Lamp Type(s):LED
Size(s):48"L
Listings: 
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Baseplate16-gauge CRS baseplate.TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Electrical(Single- and Dual-Mode ICT) Serviceable mid-power white and 405nm Indigo LED array.  Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance.  Minimum 82 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF).  Minimum 85% driver efficiency.  Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities.  165μA maximum source current.  Single-Mode ICT provides a single, white disinfection operational mode.  Dual-Mode ICT provides two operational modes based on room occupancy.  White Disinfection Mode is a white LED array for ambient lighting plus a simultaneous low-power 405nm LED array for low-level, continuous and safe environmental disinfection.  Indigo Disinfection Mode is a higher-level 405nm array for continuous safe environmental disinfection during periods of room vacancy.  The operational mode is determined via internal low-voltage device based upon the input signal provided by an external control device/system.  Luminaire dimming is overridden in this operational state.  Refer to the Kenall Dual-Mode ICT Control Application Guide for further description.
HousingMarine grade aluminum body with die-cast end caps. Housing attaches to mounted baseplate. Housing secured with countersunk fasteners. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. Antimicrobial finish standard on exposed surfaces of installed luminaire.
InstallationStandard six-point wall mounting via fasteners supplied by others.
LensUV-stabilized, high impact resistant, 100% DR frost acrylic. Smooth exterior. Nominal thickness .080". Lens securely positioned in body channels.
ListingsCertified to UL standards by Intertek Testing Laboratory for Damp Locations.
PatentU.S. Patent No. D562,767 on Low Voltage Controller (LVC) option.
WarrantyLimited five (5) year LED warranty.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

top