| Baseplate | 16-gauge CRS. Baseplate provided with six-point mounting holes and one wireway hole. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Electrical | LED: Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor. 0°F min. starting temperature standard.
|
|---|
| Gasket | Die-cut closed cell neoprene gasket seals lens/housing to mounting surface. |
|---|
| Hardware | Two stainless steel Torx® with center pin fasteners secure lens/housing to baseplate. |
|---|
| Installation | Six-point mounting required for Peace of Mind Guarantee®. “Twist-out” sections, with gaskets, permit 1/2" conduit access on each end without special adapter. |
|---|
| Lens | One-piece wraparound lens with eight alignment security tabs for baseplate engagement. UV-stabilized, high impact, virgin injection molded clear prismatic polycarbonate. Nominal thickness .125". |
|---|
| Listings | UL and CUL listed for Wet Location – covered ceilings only. |
|---|
| Lumen Data | N1048 Lumen Data |
|---|
| Photometrics | For photometric information, go to www.kenall.com. |
|---|
| Sockets | Shock-resistant sockets with internal locking collar to ensure positive lamp retention. |
|---|
| Warranty | Limited five (5) year warranty.
|
|---|