| Baseplate | 16-gauge CRS. Baseplate provided with eight-point mounting holes and one wireway hole. TGIC polyester powder coat – 5-stage pre-treatment. Salt
spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Electrical | LED: Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range, maximum driver source of 250 μA. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor. 0°F min. starting temperature standard.
|
|---|
| Gasket | Die-cut closed cell neoprene gasket seals lens/housing to mounting surface. |
|---|
| Hardware | Six stainless steel Torx® with center pin fasteners secure lens/housing to baseplate. |
|---|
| Installation | Eight-point mounting required for Peace of Mind Guarantee®. “Twist-out” sections, with gaskets, permit 1/2" conduit access on each end without special adapter. |
|---|
| Lens | One-piece wraparound lens with eight alignment security tabs for baseplate engagement. UV-stabilized, high impact, virgin injection molded clear prismatic polycarbonate. Nominal thickness .125". |
|---|
| Listings | UL and CUL listed for Damp Locations – wall mount. UL and CUL listed for Wet Location – covered ceilings only. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux. |
|---|
| Lumen Data | N548 Lumen Data |
|---|
| Patent | U.S. Patent No. 246330; 4025780. |
|---|
| Photometrics | For photometric information, go to www.kenall.com. |
|---|
| Sockets | Shock-resistant sockets with internal locking collar to ensure positive lamp retention. |
|---|
| Warranty | Limited five (5) year warranty for LED lamps.
|
|---|