| Ballast | Quantity and type as specified – see ordering information. All ballasts UL listed class P. Optional removable reflector/lamp/ballast tray with quick disconnect. |
|---|
| Baseplate | Prime grade material as specified – see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion. |
|---|
| Electrical |
Available 3000K, 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constantcurrent driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); 330 μA max. source current. LF: Lamps quantity and type as specified – see Ordering Information. Lamps supplied by others. Ballast quantity and type as specified – see Ordering Information. All ballasts UL listed class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
|
|---|
| Fasteners | Hardened security screws as specified – see ordering information. Fully recessed. |
|---|
| Finish | TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Hinge | Full length continuous heavy gauge internal piano hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes. |
|---|
| Housing | One-piece die-formed prime grade material as specified – see ordering information. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contraband concealment. |
|---|
| Installation | Fixture not suitable for Surface Conduit or Continuous Row Mounting. |
|---|
| Lamps | Quantity and type as specified – see ordering information. Lamps supplied by others. |
|---|
| Lens | As specified – maximum thickness .875" – see ordering information. Kenall recommends a prismatic inner lens and a clear outer lens. Two clear lenses used in combination cannot be provided. |
|---|
| Lens Retention | Vertically adjustable continuous “Z” brackets of prime grade material, secured to housing via thru-studs (6" maximum spacing). |
|---|
| Listings | UL and CUL listed for damp locations. |
|---|
| Luminous Seal | Polyurethane foam prevents light leaks from luminaire base. |
|---|
| Photometrics | Efficiency of SCD4-0/0-432-IS-1-120-1/B-1 = 65.6%. For photometric information, go to www.kenall.com. |
|---|