| Ballast | Quantity and type as specified – see ordering information. All ballasts UL listed class P. Optional removable reflector/lamp/ballast tray with quick disconnect. |
|---|
| Baseplate | Prime grade material as specified – see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion. |
|---|
| Electrical |
(Single- and Dual-Mode ICT) Serviceable mid-power white and 405nm Indigo LED array. Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance. Minimum 82 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 330μA maximum source current. Single-Mode ICT provides a single, white disinfection operational mode. Dual-Mode ICT provides two operational modes based on room occupancy. White Disinfection Mode is a white LED array for ambient lighting plus a simultaneous low-power 405nm LED array for low-level, continuous and safe environmental disinfection. Indigo Disinfection Mode is a higher-level 405nm array for continuous safe environmental disinfection during periods of room vacancy. The operational mode is determined via internal low-voltage device based upon the input signal provided by an external control device/system. Luminaire dimming is overridden in this operational state. Refer to the Kenall Dual-Mode ICT Control Application Guide for further description.
|
|---|
| Fasteners | Hardened security screws as specified – see ordering information. Fully recessed. |
|---|
| Housing |
One-piece die-formed prime grade material as specified – see Ordering Information. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contraband concealment. 2' completely concealed internal drop slot piano hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for Full Length Internal Hinge (IHF). TGIC polyester powder coat finish – 5-stage pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
|
|---|
| Installation | Fixture not suitable for Surface Conduit or Continuous Row Mounting. |
|---|
| Lamps | Quantity and type as specified – see ordering information. Lamps supplied by others. |
|---|
| Lens | As specified – maximum overall thickness 0.375" – see Ordering Information. High-efficiency diffused DR acrylic inner lens. Lens retention by vertically adjustable continuous “Z” brackets of prime grade material, secured to housing via thru-studs (6" maximum spacing). Polyurethane foam prevents light leads from luminaire base. |
|---|
| Lens Retention | Vertically adjustable continuous “Z” brackets of prime grade material, secured to housing via thru-studs (6" maximum spacing). |
|---|
| Listings | UL and CUL listed for damp locations. See ordering information for wet location applications. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. |
|---|
| Lumen Data | SSA Lumen Data |
|---|
| Photometrics | Efficiency of SSA4-0/0-232-IS-1-120-1/B-1 = 67.2%. For photometric information, go to www.kenall.com. |
|---|
| Warranty | Limited five (5) year warranty. |
|---|