| Electrical |
Single, white disinfection mode. Serviceable white and 405nm Indigo LED array. Available 3200K, 3700K and 4300K color temperature with 3-step MacAdam variation allowance. Minimum 82 CRI standard. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); 165μA maximum source current. Optional eldoLED ECOdrive DALI driver with 1-100% range.
|
|---|
| Heatsink | Die-cast aluminum with external radial fins for natural convection. |
|---|
| Listings |
Luminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP64 and IP65 rating per IEC60598. NSF2 Splash/Non-Food Zone. Optional CCEA compliance. EPA Est. No. 99283-WI-1.
|
|---|
| Optical |
Diffused tempered glass upper lens. Available with various reflector distribution patterns and finishes. Flush lens trim options include a clear lens. See distribution and reflector finish ordering information for available options.
|
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric information, go to www.kenall.com. |
|---|
| Rough-In Frame |
18-gauge die-formed, corrosion-resistant steel and aluminum. Enclosed housing prevents accidental contact of trim section with potential electrical conductors within the ceiling space. Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Universal mounting brackets accept 3/4" and 1-1/2" lathers channel, 1/2" EMT conduit and hanger bars. Quick-access junction box accessible post-installation from above and below ceiling. Includes (4) 1/2" and (2) 3/4" knock-outs to allow straight conduit runs. Listed for (8) 12AWG, 90oC conductors and feed-thru branch wiring.
|
|---|
| Trim |
IP-rated trim section incorporates the heat sink, LED module, optics and lower trim. All components with potential contact to rough-in section are insulated to withstand a minimum 1000VAC dielectric breakdown. Configurable with an IP64-rated Regressed or Flush lens trim that is secured to the Rough-In frame with hidden torsion springs, or an IP65 Flush lens trim secured with four (4) Phillips-head, captive fasteners. Anti-microbial finish standard on all exposed painted surfaces. See trim ordering information for available options.
|
|---|
| Warranty | Limited five (5) year LED warranty. |
|---|