| Driver/Controls | 120-277VAC, 50/60Hz electrical input (PF ≥ 0.9, THD < 20%). Minimum 85% electrical efficiency. Serviceable, constant-current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. |
|---|
| Heatsink | Die-cast aluminum with external radial fins for natural convection. |
|---|
| LED Module | Tunable-white LED array provides 2700K through 6500K CCT range with a two-point path. 3-step MacAdam variation allowance on each CCT. Minimum 82 CRI (R9 >20). |
|---|
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP64 rating per IEC60598. Conducted emissions controlled as per MIL-STD-461G. NSF2 Splash/Non-Food Zone. Optional CCEA compliance. |
|---|
| Optical | High-efficiency mixing chamber design with regressed diffused tempered glass lens producing uniform light output. Available with various reflector finishes – see Ordering Information for available options. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric information, go to www.kenall.com. |
|---|
| Rough-In Frame | 18-gauge die-formed, corrosion-resistant steel. Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Adjustable mounting bars for installation with wood and steel frame joists and T-grid ceiling systems spaced up to 24" on center. Quick-access junction box accessible post-installation from above and below ceiling. Includes (5) 1/2" knock-outs to allow straight conduit runs. |
|---|
| Trim/Housing Section | IP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Regressed lens trim is secured to the Rough-In frame with hidden torsion springs. Anti-microbial finish standard on all exposed painted surfaces. |
|---|
| Warranty | Five (5) year warranty against mechanical defects. Five (5) year warranty on LED lamps and power regulation components for defects resulting in a fixture lumen depreciation of 30% or greater.
|
|---|