| Electrical | LED: Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor.
|
|---|
| End Caps | Marine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded styles only). |
|---|
| Hardware | Stainless steel, tamper-resistant Torx fasteners secure lens in housing body's lens channel (four on 24", 36", and 48" housings; eight on 72" and 96" housings). |
|---|
| Housing | Marine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional, architectural and custom finishes. |
|---|
| Installation | Standard four-point (24" housing) six-point (36" and 48" housings) and twelve-point (72" and 96" housing) mounting required for Peace of Mind Guarantee®. |
|---|
| Lens | UV-stabilized, high impact extruded clear or pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets. |
|---|
| Listings | UL and CUL listed for Wet Location – covered ceiling mount. UL certified IP64 per IEC 60598. Damp rated – ceiling mount. Corner, horizontal wall and pendant mount installation – damp location only. ADA compliant. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. |
|---|
| Lumen Data | MLHA12 Lumen Data |
|---|
| Patent | No. 6,984,055; No. 7,494,241; No. 8,550,656. |
|---|
| Reflector | Full reflector/wire cover – 92% reflectivity. |
|---|
| Sockets | Shock-resistant sockets with internal locking collar to ensure positive lamp retention. |
|---|
| Warranty | limited ten (10) year warranty for LED Lamps.
|
|---|