Skip to Content
Kenall Manufacturing - Homepage
Main Content

MLRS5

Millenium Stretch

MLRS5 Main Image
MLRS5 Main Image
Model #: MLRS5
Features:
  • Surface mount – ceiling or wall; 5"×24", 36", 48", 72" and 96"
  • Extruded aluminum housing with decorative end caps
  • Low-profile – ADA compliant
Application(s):Parking Garage
Parks and Recreation
Locker Rooms
Multifamily Housing
Walkways
Stairwells
Dorm Rooms
Schools and Universities
Foyers and Lobbies
Corridors
Exteriors and Entryways
Lens Type(s):Pearlescent High Impact 100% DR Acrylic
Clear High Impact Acrylic
Lamp Type(s):LED
Linear Fluorescent
Size(s):5"W
Listings:  
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalLED: Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range, maximum driver source of 250 μA. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor.
End CapsMarine grade die-cast aluminum. Four styles available: Flat, Rounded, Reveal and Stepped. Conduit and ”Wiremold™ ready” knockout visible only from interior of end cap (For Flat and Rounded styles only).
HardwareStainless steel, tamper-resistant Torx® with center pin fasteners secure lens in housing body's lens channel (eight on 72" and 96" housings, four on 24", 36" and 48" housings).
HousingMarine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional, architectural and custom finishes.
InstallationStandard two-point (24" housing), four-point (36" and 48" housing) and eight-point (72" and 96" housing) mounting recommended.
LensUV-stabilized, high impact extruded clear acrylic. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Damp location – corner, horizontal wall, vertical wall and pendant mount installation. See Options for Wet Location – covered ceiling mount.
Lumen DataMLRS5 Lumen Data
PatentNo. 6,984,055; No. 7,494,241; No. 8,550,656.
ReflectorFull reflector/wire cover – 92% reflectivity.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyLimited ten (10) year warranty for LED Lamps.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

top