N1048W

Nova II for Institutional High Abuse

Model #:	N1048W
Features:	Surface wall mount – nominal 10"×48" ADA Compliant 16-gauge cold rolled steel baseplate with six-point mounting One-piece seam wraparound polycarbonate lens
Application(s):	Parking Garage Parks and Recreation Locker Rooms Multifamily Housing Cafeterias Walkways Restrooms Stairwells Schools and Universities Transportation Platforms Corridors
Lens Type(s):	Pearlescent
Lamp Type(s):	LED
Size(s):	10"W
Listings:

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Baseplate	16-gauge CRS. Baseplate provided with six-point mounting holes and one wireway hole. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Electrical	Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range. Consult factory for flourescent options.
Gasket	Die-cut closed cell neoprene gasket seals lens/housing to mounting surface.
Hardware	Two stainless steel Torx® with center pin fasteners secure lens/housing to baseplate.
Installation	Six-point mounting required for Peace of Mind Guarantee®. “Twist-out” sections, with gaskets, permit 1/2" conduit access on each end.
Lens	One-piece wraparound lens with eight alignment security tabs for baseplate engagement. UV-stabilized, high impact, virgin injection molded clear prismatic polycarbonate. Nominal thickness .125".
Listings	UL and CUL listed for Wet Location, Horizontal wall mount only.
Shroud	18-gauge CRS. TGIC polyester powder coat – 5-stage pre-treatment.
Sockets	Shock-resistant sockets with internal locking collar to ensure positive lamp retention.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.