| Baseplate | Continuous seam welded 18-gauge type 304 stainless steel construction. Mounts flush to ceiling or wall surface. Each end cap provided with .875" dia. punched, flattened knockout. |
|---|
| Electrical | Fluorescent – Electronic ballast <10% THD standard. See Ordering Information for multiple ballasts and optional equipment. Lamps by others. Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA. |
|---|
| Fasteners | Torx® Head stainless steel fasteners standard. See Options for stainless steel center-pin reject Allen Head (AH) or Phillips Head (PH) fasteners. |
|---|
| Finish | Brushed stainless steel finish (#4B) or white TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Hinge | Continuous 1" open leaf stainless steel hinge secured to door and housing. |
|---|
| Housing | One-piece seam welded 16-gauge type 304 stainless steel construction. |
|---|
| Installation | For housing without wiring and mounting holes, see Field Drilled Installation Holes Option (FDIH). Four-point mounting and polycarbonate lens required for Peace of Mind Guarantee®. |
|---|
| Lens Retention | Lens positioned in channels and retained with stainless steel fastener(s). |
|---|
| Lens/Gasket | UV-stabilized, pearlescent or clear polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .125". Linear silicone gasket seals lens housing to baseplate. |
|---|
| Listings | UL and CUL listed for Wet Location – covered ceiling or horizontal wall mount. UL certified IP65 per IEC 60598. |
|---|
| Lumen Data | TES5 Lumen Data |
|---|
| Sockets | Shock-resistant fluorescent sockets with internal locking collar to ensure positive lamp retention. |
|---|
| Warranty | One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. |
|---|