| Baseplate | Continuous seam welded 18-gauge type 304 stainless steel construction. Mounts flush to ceiling or wall surface. Each end cap provided with .875" dia. punched, flattened knockout. |
|---|
| Electrical | Electronic ballast <10% THD standard. See Ordering Information for multiple ballasts and optional equipment. Lamps by others. |
|---|
| Fasteners | Torx® Head stainless steel fasteners standard. See Options for stainless steel center-pin reject Allen Head (AH) or Phillips Head (PH) fasteners. |
|---|
| Finish | Brushed stainless steel finish (#4B) or white TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Hinge | Continuous 1" open leaf stainless steel hinge secured to door and housing. |
|---|
| Housing | One-piece seam welded 16-gauge type 304 stainless steel construction. |
|---|
| Installation | For housing without wiring and mounting holes, see Field Drilled Installation Holes Option (FDIH). Four-point mounting and polycarbonate lens required for Peace of Mind Guarantee®. |
|---|
| Lens Retention | Lens positioned in channels and retained with stainless steel fastener(s). |
|---|
| Lens/Gasket | UV-stabilized, pearlescent or clear polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .125". Linear silicone gasket seals lens housing to baseplate. |
|---|
| Listings | UL and CUL listed for Wet Location – covered ceiling or horizontal wall mount. UL certified IP65 per IEC 60598. |
|---|
| Lumen Data | TES8 Lumen Data |
|---|
| Sockets | Shock-resistant sockets with internal locking collar to ensure positive lamp retention |
|---|
| Warranty | Four-point mounting, polycarbonate lens and Torx® with center pin fastener (1) required for Peace of Mind Guarantee®. |
|---|